Operated spider crane hire · Southern England
Big lift.Tight spot.
A 3.2-tonne Jekko SPX532.2 CDH that folds down to 770 mm, narrow enough for an 800 mm doorway, delivered to your site with an experienced operator at the controls.
- Operator included
- Lift planning support
- Diesel or 100% electric
Hydraulic jib1,000 kg SWLTelescopic boom11.8 m tip heightSelf-levelling legs9 angle steps each- Max lifting capacity
- 3,200kg
- Max tip height with jib
- 17.0m
- Folded width
- 770mm
- Max radius with jib
- 14.8m
Operated hireMachine + operator + plan
What you get
One crane.
One operator.
No guesswork.
You don’t hire a machine from us and hope for the best. You book a lift. We turn up with the crane, the operator and a plan, and we don’t leave until your load is where it needs to be.
The crane
A Jekko SPX532.2 CDH: 3.2 t, 17 m with the jib, diesel outside, 100% electric inside.
The operator
A trained spider crane operator who sets up, levels and runs every lift on your site.
The paperwork
RAMS for the crane and help with your lift plan, or we’ll manage the whole lift for you.
The logistics
Delivery, set-up, pack-down and collection, all arranged by us.
Access check
Will it fit?
Tracks closed, the SPX532.2 is 770 mm wide and 1,990 mm tall. Enter your narrowest opening and see it to scale.
It weighs 2,657 kg, so tell us about suspended floors, cellars, drain covers or soft ground on the route. If it won’t track through, we can often lift it over instead.
Applications
Built for the lifts nobody else can reach
Behind terraces, inside atriums, over conservatories, across boatyards. If a mobile crane can’t get close and a telehandler can’t get high enough, it’s probably a job for us.
01Glazing & curtain wallBig panes, set to the millimetre.
02Steel & structuralBeams in, bolts up, crane out.
03Timber frame & SIPsPanels and glulam where access is awkward.
04Rooftop plant & HVACCondensers, AHUs and chillers, handled.
05Indoor & atrium liftsThrough the door and work inside, emission-free.
06Landscaping & stoneBoulders, planters, pods and garden rooms.
07Marine & boatyardsA gentle hand on the hard standing.
08Industrial & utilitiesMachinery moves and plant changes.
JEKKO / SPX532.2 CDHThe machine
Italian-built. Millimetre-precise.
Jekko’s SPX532.2 packs 3.2 tonnes of capacity into a machine 770 mm wide, with every function on a radio remote and a live load chart on board.
- Main boom
- 11.8 m
- With jib
- 17.0 m
- Pick & carry
- 400 kg
- Weight
- 2,657 kg
Radio remote
The operator stands where they can see the load, not the machine.
Live load chart
7″ IP66 display with live stability area and full LMI.
Bi-energy
18.5 kW Kubota diesel, or plug in for silent, emission-free work.
Hook or winch
80 m of rope: 800 kg single fall, 3,200 kg on four falls.
How it works
Four steps to a done lift
- 01
Tell us the lift
Weight, size, where it’s going and a photo of the access. Use the form or ring us. We reply the same working day.
- 02
We check & plan
We check the load chart, the route and the ground, visit the site if we need to, and help put the lift plan together.
- 03
We arrive & set up
Delivered, tracked into position through the access and levelled on its outriggers in minutes.
- 04
We lift, you build
Our operator works to your team on the radio remote. Loads go down gently and exactly where you want them.
Coverage
Across the South
Based in Hampshire and working across Southern England. Further afield? If the job suits the machine, we’ll travel.
- Home ground
- Hampshire · West Sussex · Surrey · Isle of Wight
- Regular runs
- Dorset · Wiltshire · Berkshire · East Sussex
- By arrangement
- Kent · Greater London · Oxfordshire · Somerset
Questions
Straight answers
Can’t see yours? Ring 0330 190 0290 and ask the people who’ll do the lift.
What does “operated hire” include?
The Jekko SPX532.2 CDH, delivery and collection, and one of our trained crane operators to set up and run it. We supply RAMS for the crane and can help with your lift plan. If you’d rather hand the whole thing over, ask about a fully managed contract lift.
How narrow an access can it get through?
With tracks closed the crane is 770 mm wide and 1,990 mm high, so it passes through an 800 mm clear opening with 2 m of headroom. Try the access checker on our home page. It weighs 2,657 kg, so let us know about floors, cellars, drains or soft ground on the way in and we’ll check them.
Can it work indoors?
Yes. The CDH is bi-energy: an 18.5 kW Kubota diesel for outdoor work and an electric power pack for 100% electric, emission-free running indoors. Just give us a suitable power supply.
How much can it lift at distance?
Up to 3,200 kg close in and up to 17.0 m tip height with the hydraulic jib. Capacity drops as radius increases, so send us the weight and the distance from where the crane can stand and we’ll check it against the load chart.
How far in advance should I book?
A week’s notice is ideal, especially for anything that needs a site visit. Short-notice lifts are often possible, so call and ask.
What do you need from me?
The site address, what you are lifting (weight and size), where it needs to go, and any access restrictions. Photos of the access route and set-up area help a lot. You can attach them when we reply.